ᱪᱮᱫ ᱞᱮᱠᱟ ᱛᱮ ᱠᱟᱨᱴᱩᱱ ᱧᱮᱞ ᱦᱩᱭᱩᱜᱼᱟ?

After the fasteners are tightened, the height and quality of the oil should be checked, as the liquid will gradually wear out and oxidize at high temperatures, resulting in reduced liquid level and poor performance.

1. Check the height of the battery liquid level with a test tube with a diameter of 5 N 6mm. From the filling port vertical force to contact with the filter screen, close the upper end of the test tube with the thumb and lift the tube to measure the height of the liquid column. Battery liquid level, standard should be 10 N 15mm.

᱒, ᱵᱟᱹᱲᱛᱤ ᱩᱥᱩᱞ ᱨᱮᱭᱟᱜ ᱪᱤᱛᱟᱹᱨ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱾

Remove the oil dipstick when it is cold, wipe it, insert it into the bottom of the oil pan, and observe the height between the upper and lower marking lines after exiting. When the hot car is turned off, wait for the standby oil to flow into the sump before measuring.

3. Check the height of the liquid level of the coolant. The coolant in the tank should be full when cold. The height of the liquid in the expansion tank should be between the markings. Hot liquid level should be slightly higher than the superscript

᱔, ᱞᱮᱵᱮᱞᱤᱝ, ᱯᱷᱮᱡᱽ ᱥᱴᱨᱤᱯ ᱠᱚᱰ ᱞᱮᱵᱮᱞᱤᱝ

ᱱᱳᱴ ᱨᱮ ᱢᱮᱴᱨᱤᱠᱥ ᱱᱳᱴ ᱟᱨ ᱱᱳᱴ ᱱᱳᱰ ᱱᱳᱰ ᱱᱳᱰ ᱱᱳᱰ ᱱᱳᱰ ᱱᱳᱰ ᱱᱳᱰ ᱨᱮ ᱩᱫᱩᱜ ᱟᱠᱟᱱᱟ ᱡᱮ ᱱᱳᱰ ᱫᱚ ᱱᱳᱴ ᱠᱟᱱᱟ ᱥᱮ ᱵᱟᱝ ᱾

᱕, ᱜᱩᱱ ᱠᱚ ᱨᱮᱭᱟᱜ ᱜᱩᱱ ᱧᱮᱞ ᱢᱮ

ᱡᱟᱦᱟᱸ ᱞᱮᱠᱟ ᱜᱮ ᱵᱮᱵᱷᱟᱨ ᱦᱩᱭ ᱫᱟᱲᱮᱭᱟᱜᱼᱟ, ᱟᱢ ᱧᱮᱞ ᱫᱟᱲᱮᱭᱟᱜᱼᱟᱢ ᱪᱮᱫ ᱞᱮᱠᱟ ᱟᱢ ᱥᱩᱱᱩᱢ ᱮᱢ ᱵᱮᱵᱷᱟᱨᱟ᱾

(a) ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱜᱮᱭᱟ: https://teptions appoption aption ᱫᱚ 1.5 ko aptions ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ, ᱡᱟᱦᱟᱸ ᱫᱚ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ; ᱡᱩᱫᱤ ᱱᱚᱣᱟ ᱥᱩᱱᱩᱢ ᱵᱟᱝ ᱠᱟᱱᱟ, ᱮᱱᱠᱷᱟᱱ ᱫᱟᱜ ᱨᱮ ᱥᱩᱱᱩᱢ ᱧᱮᱞ ᱢᱮ; ᱡᱩᱫᱤ ᱱᱚᱣᱟ ᱦᱩᱭ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ, ᱮᱱᱠᱷᱟᱱ ᱮᱴᱟᱜ ᱠᱚ ᱫᱚ ᱜᱞᱩᱠᱚᱡᱽ ᱥᱟᱶ ᱡᱚᱲᱟᱣ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ; ᱞᱤᱞ ᱢᱟᱨᱥᱟᱞ ᱫᱚ ᱟᱹᱰᱤ ᱠᱚᱢ ᱜᱮᱭᱟ ᱪᱮᱫᱟᱜ ᱥᱮ ᱚᱱᱟ ᱫᱚ 2x4ms ᱠᱟᱱᱟ ᱾

(2007) options (apphips) ᱫᱚ ᱢᱤᱫ ᱞᱮᱠᱟᱱ ᱡᱤᱱᱤᱥ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ 50°C ᱨᱮ ᱢᱮᱱᱟᱜ-ᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱫᱟᱨᱮ ᱠᱚ ᱨᱮ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱠᱟᱱᱟ ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱠᱟᱱᱟ; ᱵᱟᱝᱠᱷᱟᱱ, ᱨᱤᱢᱚᱴ ᱨᱮᱭᱟᱜ ᱨᱚᱝ ᱫᱚ ᱞᱤᱠᱮᱡᱽ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱒.᱓ x ᱙.᱑ ᱨᱮ ᱧᱮᱞᱚᱜ ᱠᱟᱱᱟ ᱾